Toshiba D-KR4SU - Manual (Page 58)

58
Introduction Playback
DVD-RAM
Playing a TV program currently being recorded (Chase Play)
You can begin playback from the beginning of a program currently being recorded.
You will find this function of great advantage on long programs, as you do not have to wait for the end of
recording to begin playback.
ANGLE SUBTITLE AUDIO/SAP FREEZE
REMAIN REC MODE EXTEND
SETUP
VOL CH
TIMESLIP
INPUT SELECT MUTE
MENU
TV
DVD
INSTANT
REPLAY
INSTANT
SKIP
TOP MENU
QUICK MENU
SKIP REV STOP SKIP FWD
FWD PLAY REV
REC
SEARCH
T
ADJUST CHP DIVIDE
CLEAR
ZOOM
1 2 3
4 5 6
+10
7 8 9
0
SELECT/
ENTER
EASY
NAVI
1
While recording a TV program on a DVD-RAM
disc, press TIMESLIP.
The recorder displays a TV program as it is being
recorded.
2
Go back to the beginning of the TV program
using SKIP REV.
When you go back to the beginning, playback starts
automatically.
You can confirm how far you are from the current
broadcast by selecting “Time bar” from Quick Menu.
3
Locate a scene you want through the
following operations if necessary.
Fast-forward/fast-reverse:
Press FWD or REV button.
Forward/reverse Slow-motion:
First press button then press FWD or REV button.
Forward/reverse frame by frame play:
First press button then press ADJUST button.
• To resume normal playback, press the PLAY button.
• You can play in fast-forward to within 10 seconds prior to the
current broadcast.
4
Press TIMESLIP to exit.
The current broadcast returns.
Notes
• Time slip recording/playback stops when the DVD-RAM disc is filled up. You can play up to a location where the recorder
stopped the recording. The time slip recording/playback cannot begin if a DVD-RAM disc is full.
• The playback picture may appear after a delay of several seconds.
• The playback location will never be identical to the record location in the program. It will always trail the record location by a
few seconds.
• While using time slip recording/playback, you cannot program a recording.
• While the TIMESLIP indicator is on, you cannot change the setting of the feature that turns off the recorder after a
programmed operation has finished.
• Even while “Auto power off” is selected, the recorder does not turn off if the recording end time comes during playback of a
program being recorded.
• Playback may jump a few seconds back or pause depending on the disc or data condition.
• When a timer recording or normal recording is executing with the recording mode “XP” or “AT” (when a high bit rate is
automatically set. page 42), this function is not available.
SKIP REV
TIMESLIP
TIMESLIP
Start