Telex C-2002 - Manual (Page 30)

24
Vega’s C-2002
7.4.5.2 Duplex Enable
The Duplex mode allows the console operator to hear receive audio
while transmitting.
PROG1 - Toggle Duplex Mode Enabled/Disabled.
PROG4 - Return to Menu 4.
7.4.6 Menu 5 System Setup Screen
PROG1 - setup the MicAGC Function.
PROG3 - Next Menu (Menu 1).
PROG4 - Returns to the System Setup Menu.
7.4.6.1 MicAGC Function
This enables and disables Automatic Gain Control on the Mic Input.
PROG1 - Toggle the MicAGC function on and off.
PROG4 - Return to Menu 5.
7.4.6.2 Handset installed
If a handset or headset is to be used with the unit, it must be
programmed as such in this location. It is required for RX audio
routing.
PROG1 - Toggle the Handset Yes/No.
PROG4 - Return to Menu 5.
7.4.7 Menu 6 System Setup Screen
PROG1 - setup the Parallel Console UP-Date Function.
PROG3 - Next Menu (Menu 1).
PROG4 - Returns to the System Setup Menu.
7.4.7.1 Parallel Console UP-Date Function
This enables and disables Parallel Console UP-Date Function.
PROG1 - Toggle the function on and off.
PROG4 - Return to Menu 6.
7.5 Alphanumeric Function-Line Setup
This screen asks for the operator to choose a Line/Function tone combination or a Group to have an alphanumeric
assignment or group alphanumeric assignment. While this screen is displayed, the keyboard blinks LN1-LN2, F1-
F8, and ALT to remind the operator what buttons are used in this mode for programming.
PROG4 - Return to the Opening Menu.
Line button - Go to Line/FTone Selection Screen.
Function tone button - Go to Line/FTone Selection Screen.
ALT button - Go to alternate F-tone selection.
Duplex: Enabled
Tgl back
PROG1 PROG2 PROG3 PROG4
System Settings
MicAGC Hand nxt back
PROG1 PROG2 PROG3 PROG4
MIC AGC: OFF
Tgl back
PROG1 PROG2 PROG3 PROG4
Handset Port:DISABLE
Tgl back
PROG1 PROG2 PROG3 PROG4
System Settings
CUpdate next back
PROG1 PROG2 PROG3 PROG4
Console Update: OFF
Tgl back
PROG1 PROG2 PROG3 PROG4
Select Line+FT/Group
back
PROG1 PROG2 PROG3 PROG4