Tascam GA-30CD - Manual (Page 19)

IMPORTANT SAFETY INSTRUCTIONS
TASCAM GA-30CD
1
Change.the.following.GA-30CD.settings.by.pressing.
and.holding.
TUNER/SETUP .to.open.the. SETUP .( MENU ).
screen..
Playback.mode.selection.
Tuner.mode.selection
Tuner.speaker.output.ON.and.OFF
Initialize.effect.bank.settings •
•
•
•
Press. TUNER/SETUP .again.to.cycle.through.the.
setting.items..Use.the. DOWN .and. UP . keys.to.adjust.the.
values.for.each.item.and.the. CENTER .key.to.restore.the.
default.setting..
Press. TIME/ESC .to.finish.making.settings.and.close.
the. SETUP .( MENU ).screen..
These.settings.are.saved.automatically.
Playback mode selection
Use.the. PLAY .item.to.select.whether.all.tracks.on.a.disc.
( ALL ).are.played.or.only.the.currently.selected.track.
( SGL ).is.played.when.using.the.loop.playback.function..
The.default.setting.is. ALL ..
Use.the. TMOD .item.to.set.the.tuner.mode..(See.“Using.
the.tuner”.on.page.18.)
CHR :.chromatic.mode.(default.setting)
GTR :.guitar.mode.
Tuner settings
Use.the. FXRS .item.to.restore.all.effect.banks.to.their.
factory.settings..
NO .appears.on.the.LCD.when.you.choose.the. FXRS .
item..Press.the. DOWN .or. UP . key.and. YES .will.appear..
Press.and.hold.the. CENTER key.to.restore.all.effect.
banks.to.their.factory.settings..
After.initialization.is.complete,. DONE .appears.on.the.
LCD.and.the.time.display.reappears..
CAUTION
Initializing effect banks erases all the preset bank
settings that have been made. Use this function
only if you are sure that you want to overwrite these
settings with the factory defaults.
Initializing effect banks
Tuner speaker output
Use.the. TOUT .item.to.set.whether.or.not.the.guitar.
signal.outputs.through.the.center.speaker.when.the.
tuner.is.turned.on..The.default.setting.is.
OFF ..
8 – Changing settings