Toshiba SD-V57HTSU - Manual (Page 37)

Speaker Setup
OPERA
TION
37
Adjust the following settings for the built-in 5.1 channel
surround decoder.
1. Select “5.1 Speaker Setup” using the 3 3/4 4
buttons on the setup menu.
2. While “5.1 Speaker Setup” is selected, press 2
button.
3. Press 2 2 buttons to select the desired speaker.
4. Adjust options by using 3 34 41 1 2 2 buttons.
Speaker selection
Select a speaker that you want to adjust. ((Front speak-
ers (Left), Centre Speaker, Front speakers (Right), Rear
speakers (Left), Rear speakers (Right), or Subwoofer))
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press 1 1 / 2 2 to adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Size
Since the speaker settings are fixed, you cannot
change the settings.
Subwoofer’s size is fixed “Large” and the other
speaker’s size are fixed “small”.
Distance
If you connected speakers to your DVD/VCR Receiver ,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time. (1~20 ft, 1 ft = 0.30 m)
Note
You can not set the distance of subwoofer speaker.
Test
Press ENTER to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
Front Left (L) → Centre → Front Right (R) →
Rear Right (R) → Rear Left (L) → Subwoofer
Return
Press ENTER to return to the previous menu.
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
Disc Audio
R R
Front L
Volume 0 dB
Size Small
Distance 1 ft
Test
Return