T+A Elektroakustik 1235 R - Manual (Page 12)

12
Operating the DVD 1235 R
Switching on
Press the     button on the front panel of the unit.
The green indicator LED above the button lights up, as
does the display screen. The unit is now ready for use.
For Stereo playback (CD /SACD) switch ON your HiFi
system and select the audio input the DVD 1235 R is
connected to.
For playback of DVDs select the appropriate digital input
of your surround decoder or surround receiver. Switch on
your TV set and choose the video input to which the
DVD 1235 R is connected to.
Loading a Disc
1. Press the     button on the front panel to open
the drawer.
2. Place the disc in the centre of the circular recess in
the drawer, with the side to be played facing down.
3. Press the     button on the front panel to close
the drawer.
Starting playback
Some discs feature an “autostart” function. These discs
will start automatically. Other DVDs show an On-Screen-
Menu after start-up. Please follow the instructions of the
menu.
CD and SACD are started by pressing the    -
button.
Stopping playback
You can stop playback at any time by pressing the

   button.
Resuming playback
You can resume playback of a stopped CD / DVD / VCD
by pressing the
   - button on the front panel, or the
    or     button on the remote control handset.
RESUME
After loading a previously played DVD/VCD the playback
can be continued at the position where the playback was
interrupted before. Please press the
    /    
button while the 'RESUME' icon is displayed on the
screen.
Note:
Some discs suppress the resume function in which case,
these discs can only be started from their disc menu.
The RESUME function is available not only for the DVD
played last, but also for the last four DVDs that were
played.