T+A Elektroakustik 1235 R - Manual (Page 37)

37
    R LINK 2 nd ADDR .
Toggle switch for the selection of the remote control
address of this device within a
-R LINK system.
Note:
If no CD player is operated within the  'R' system,
the 'R LINK 2 nd ADDR.' switch of the DVD 1235 R should
be configured to the additonal CD address (position
switch position = 'CD')
In this case the stereo output     should be connected to
the CD input of the pre- or integrated amplifier. The

   button will then select the DVD 1235 R for normal
stereo CD play back, the DVD button will select the
DVD 1235 R for DVD play back. The unit will respond to
remote control signals for both of the CD and DVD
inputs.
If a stereo CD player is present in the system, please set
the switch to position '-'. The DVD 1235 R now will only
respond to remote control signals if the input DVD is
selected as source.
    Mains input
The mains power lead is connected to this socket. For
details of a correct mains connection please read the
notes in the chapter 'Installation, Using the unit for the
first time, Safety notes'.
   
VIDEO OUT
Video output for TV sets, video recorders or other
equipment with standard composite (CVBS) video inputs.
    S-VIDEO OUT
Output socket for TV sets, video recorders or other
equipment with S-Video (S-VHS) video inputs.
    AV OUT (SCART)
Socket for for TV sets, video recorders or other
equipment with SCART audio/ video inputs.
This socket delivers additional to standard composite
(CVBS) video signals the high quality RGB component
video signals. To achieve the best possible video
performance, please select the RGB mode at your
TV/monitor if this device is capable of processing these
signals.
    ANALOG OUT
Stereo audio output for TV sets, video recorders or
surround decoders.