Using the appliance, Temperature control – Tricity Bendix TB 090 FF User Manual

Page 6

Advertising
background image

6

Using the Appliance

This appliance is designed for domestic use

only, specifically for the storage of edible

foodstuffs.

The appliance is designed to operate in ambient

temperatures (surrounding air temperature) between

16 °C and 32 °C.
If these temperatures are exceeded i.e. colder or

warmer, the appliance will not operate correctly.

Should the ambient temperatures be exceeded for

long periods, the temperature in the freezer section

will rise above -18 °C and food spoilage may occur.

Before Use

Remove all packaging and securing tapes. Wash

inside the appliance with lukewarm water and

bicarbonate of soda (5 ml to 0,5 litre of water). Do not

use soap or detergent as the smell may linger. Dry

thoroughly.

Do not use detergents, abrasive powders,

highly perfumed cleaning products, wax

polishes or products containing alcohol.

F

F

To Start the Appliance

1. Allow the appliance to stand for 2 hrs after

installation.

2. Plug in the appliance and switch on at the mains

supply.

3. Turn the thermostat control to the required setting.

A setting of 3 - 4 is usually suitable for normal

operation (see thermostat control).

4. Leave the appliance for approximately 4 hours for

the correct temperature to be reached before

placing food inside.

Temperature Control

The thermostat control situated in the control panel

regulates the temperature both within the fridge and

freezer compartments. The thermostat control is

marked from 1-5, the higher the number, the colder

the setting.
Position „0”

-

Off

Position 1

-

Cold

Position 5

-

Coldest

The temperature will be affected by:

Ambient temperature

How often the door is opened

How much food is stored

Position of the appliance

Advertising
This manual is related to the following products: