Texas Instruments WR-25 User Manual

Page 19

Advertising
background image

SETTING MIN/MAX

FORM FEED

RAIN RATE

0

OFF

OFF

OFF

1

ON

OFF

OFF

2

OFF

OFF

OFF

3

ON

ON

OFF

4

OFF

OFF

ON

5

ON

OFF

ON

6

OFF

OFF

ON

7

ON

ON

ON

When rain rate is off, term rain is substituted.

Min/Max, when selected outputs at midnight the minimum and maximum value for the day. The
report function must be on in order for the output to occur. This function must also be on if you want
the minimum and maximum to be logged to memory.
Form Feed, when selected sends a form-feed character at midnight, which is normally desirable if a
printer is directly hook up to the RS-232 interface.
Rainfall rate, when selected outputs rainfall rate instead of term rain in the report function.

Special Key Functions

index

/

top

Select + Report

= Time Set Function

Select + Scale

= Calibration Set Function

Select + Average

= Printer Set Function

Select + Humidity Hold

= Humidity Calibration Set

Clear + Last

= Clears Last Rain

Select + Last

= Enters Rainfall History Mode

Clear + Maximum

= Clears all Maximums and Minimums

Clear + Minimum

= Clears all Maximums and Minimums

Clear +Scale +Average

= Performs a cold boot

Windchill + Comfort

=

Dewpoint

Keys must be pressed precisely at the same time to perform the desired function.

Lunar Tide Cycle

The lunar tide cycle function may be set to display the position of the moon in relation to its
revolution around the earth. The moon's position is the primary, although not the only, factor in
predicting high and low coastal tides. High tides are generally present when the moon is overhead
or when the moon is 180 degrees from overhead. Low tide is generally present when the moon is in
the 90 degree or the 270 degree position. This method of predicting tide works well on the West and
East coasts. On the Gulf coast, this method is not as successful.

To set the

tide clock

, follow the directions in the time set function. The first item to be entered is the

tide cycle duration. The tide cycle duration may be set from 1 to 99 hours. Twelve hours and fifty
one minutes is the normal number for a tide clock. The second item to be entered is the time of the
high tide. This information is generally found in the newspaper. If predicting the tide does not apply

WR-25 Instruction Manual

Texas Weather Instruments, Inc. WR-25 Instruction Manual

Advertising