TANDBERG Management Server D13939 - Manual (Page 14)

TANDBERG Management Server Quick Setup Guide
14
5. Move between characters by using the Up and Down arrows. Edit values by pressing Enter and using
the Up or Down arrow to modify. Press Enter again to confirm the value, or press Return to restore
the value to its previous state.
6. When finished editing the address, press Return. You will be asked to confirm your address entry on
the following screen. At the Save Changes? Prompt, use the Up or Down arrow to select Yes and
press Enter to confirm.
7. Press Return to go back to the IP Settings menu.
8. Use the Up or Down arrow to select Subnet Mask and press Enter twice.
9. Repeat steps 5-6 to enter the Subnet Mask address.
10. Press Return to go back to the IP Settings menu.
11. Use the Up or Down arrow to select Default Gateway and press Enter twice.
12. Repeat steps 5-6 to enter the Default Gateway address.