Toshiba XM-6802B - Manual (Page 4)

①
CD Tray
Insert CD Disc in tray
➁
Busy Indicator
When you install a disc into the CD-ROM drive, the BUSY light flashes
slowly as it attempts to locate the disc. One of the following will occur:
• BUSY light goes out. The CD-ROM drive is ready to read data
from the disc.
• BUSY light flashes slowly. The disc may be dirty.
• BUSY light remains ON. The CD-ROM is accessing data.
• BUSY light remains ON indefinitely. The CD-ROM is
experiencing an error
③
Eject Button
The EJECT button is used to open the disc tray so you can install or
remove a disc
④
Emergency Eject Hole
The emergency eject hole is to be used only when the CD tray will not
open when EJECT button is pressed