Thales Navigation 200 - Manual (Page 56)

Stopping and Resuming Active Track Logging
This provides the ability to turn off the recording of the active track, and then starting it up
again.
1. Press MENU.
2. Use the Arrow joystick to highlight
Track Log.
3. Press ENTER.
4. With Active Track highlighted, press MENU.
5. Highlight
Stop Logging or Resume Logging.
Note: Stop Logging is displayed only when the active track
is being recorded; Resume Logging appears only when the
active track is not being recorded.
6. Press ENTER.
Note: The eXplorist will fill in a straight line from the point
that track logging was stopped to the point where it has been
resumed. This is true unless there has been more then four
hours between the stop and the resume logging command.
In that case, the eXplorist will not draw a straight line from
the stop to the resume points of the track.
Track Logs 51
Track Log
Active Track
Apr-24
Apr-28
10.4 8
Legs Distance
M
I
Track Log List with
information at the bottom
for the number of legs and
the distance of the track
log highlighted.