TP-Link TL-WN321G - Manual (Page 15)

TL-WN321G 54M Wireless USB Adapter User Guide
Figure 3-3 Add Profile – configuration
¾ Authentication Type – Three options, Open System, Shared-Key System or
LEAP.
¾ 802.1x Setting – It enables when Authentication Type is setting to WPA.
¾ Encryption – Displays which encryption type that the driver is using. When you
select Open System, Shared-Key System as Network Authentication, there are
two options: WEP and Disabled. If you select WPA-PSK as Network
Authentication, there are TKIP and AES options instead of WEP and Disabled.
¾ Wep Key – Key #1, Key #2, Key #3, Key #4, the Key groups. You can enter 10
hexadecimal digits (any combination of 0-9, a-f, A-F) or 5 ASCII characters for 64-bit
(also called 40bits) encryption. You can enter 26 hexadecimal digits (any
combination of 0-9, a-f, A-F) or 13 ASCII characters for 128-bit (also called 104bits)
encryption.
3.2 Link Status
The Link Status tab displays the adapter's current status.
- 10 -