The Eltron Company P310 User Manual

Page 100

Advertising
background image

Step 4. Adjust the Brightness Adjustment Screw by either loosening or tightening.

Remember the amount and direction of adjustment. If loosening, push the Head
Assembly until the adjustment screw again bears against the Print Head Yoke.

Step 5. Tighten the Head Fasteners in the sequence shown.

Step 6. Print another Test Card. Then compare the cards. Any improvement in

brightness signals a proper direction of adjustment. Conversely, any deterioration
in brightness indicates that the adjustment should have been in the opposite
direction or possibly that too great an adjustment placed the Print Head beyond
the optimum point.

Step 7. Repeat Steps three through six until an optimum brightness is achieved.

6-10

980264-001 Rev.B

CHAPTER 6

Figure 6-8. Image Brightness Adjustment.

Advertising