The Eltron Company P310 - Manual (Page 94)

6.2.2 Cleaning the Print Head
Refer to Figure 6-3, and proceed as follows:
Step 1. Turn off power, and allow about five minutes for a cool down.
Step 2. Open the cover, raise the Print Head, and remove any ribbon installed.
Step 3. Using an alcohol-moistened swab and moderate pressure, clean the Print
Head elements. Check the condition of the swab. If necessary, finish with a clean
swab.
6-4
980264-001 Rev.B
CHAPTER 6
Figure 6-3. Print Head Cleaning.