Toshiba STRATA CTX DKT3000 - Manual (Page 63)

Advanced Operation
Speed Dial
Strata CTX DKT3000/2000-Series Telephone 05/02
49
Note Selected telephones may have the ability to change System Speed Dial
numbers. Follow this procedure but specify a System Speed Dial number
(200~999) instead.
3. Enter the destination digits, then press . The LCD shows “SPEED DIAL” + the
Speed Dial Number + destination + #. You hear Success Tone.
4. Release the telephone. To enter another number, repeat the process, starting with
Step 1.
CTX System Administration
The third method of storing station Speed Dial numbers is via your CTX System
Administrator, who can establish your Station Speed Dial number through
administrative software and associate a name with it. This name is used by the
Directory Dialing feature of DKT3014 large display telephones.
Advanced Speed Dial Operation
Special Characters
Speed Dial Numbers may include  ~ , , and Pause. When using the Access Code
input method (see above) it is also necessary to use to indicate you have finished
entering the destination number. This creates 14 functions to be input from the 12
buttons on the dial pad.
Long Speed Dial Numbers
Speed Dial Numbers are stored sequentially in memory areas capable of holding 32
digits. If you exceed 32 digits, the excess are stored in the next higher area and
consume the next sequential Speed Dial Number.
You can dial the entire string by entering the original Speed Dial Number and all digits
will be sent, including those in excess of 32. If that were Speed Dial Number 100,
Number 101 would no longer be available. You are not prevented from storing a new
Number 101 but, if you do, Number 100 will be shortened to 32 digits.