Toshiba STRATA CTX DKT3000 - Manual (Page 78)

User Programming
Flexible Button Codes
64
Strata CTX DKT3000/2000-Series Telephone 05/02
• Call Forward – Users can set the Call Forward (CF) destination and CF-No
Answer Timer for the CF buttons.
• One Touch – Users can set speed dial and custom feature access code
sequences for One Touch buttons.
• Background Music – Users can select Quiet Tone or the music source (up to
15) that will play on their telephone’s speaker when they activate the
%*0
button.
Note Directory number and external line buttons cannot be added or deleted, but their
ring tones can be individually changed.
In addition to the Programming Mode, an advanced programming function enables
your CTX System Administrator to individually turn On/Off the telephone’s beep
tone, handset call waiting tone, and microphone background noise cancellation option.
This mode enables LCD contrast adjustment and testing the DKT3014 LCD screen.
User Programming Mode
➤
To enter User Programming Mode, press the 3URJUDP button
...or dial  . “USER PROG MODE” appears on your LCD. The Program
LED is steady green.
➤
To exit User Program Mode, press 3URJUDP
… or go off- and on-hook press  .
Note A DKT equipped with a headset adapter ignores the hookswitch. It can only
exit User Programming by timing out (approximately 15 seconds).
Flexible Button Codes
Flexible buttons are the unassigned buttons on your keystrip that can be used to store
features. The number of available Flexible Buttons depends on your telephone model
and how the buttons are preassigned by the CTX System Administrator. See
pages 3
and 6 for the Flexible Button locations.
The following steps enable you to program features onto Flexible Buttons for one-
touch feature access.