Trek Bicycle Computer - Manual (Page 17)

Mode Set
Scroll
5
9. Cycle Scroll to the hour:
• 1, 2, 3, etc. from 1A through 12P (for 12-hour clock)
• 1, 2, 3, etc. through 24 (for 24-hour clock)
10. Push Set• to choose your setting.
“00” flashes.
11. Cycle Scroll to the minute:
• 00, 01, 02, 03, etc. through 59
12. Push Set• to choose your setting.
The screen will show one of two things:
• SPD - you are ready to ride. However, your computer has many other
features; see the Advanced Features section on pages 22-37.
• PAIR? - see next section.
Pairing (ACH digital only)
The ACH Digital computer uses a wireless system where the
computer reads radio signals from the speed, cadence, or heart
rate sensors. For the computer to differentiate the signals, the
computer must be paired to the correct sensor.
To PAIr the computer
Only activate one sensor at a time. Until Pairing for a given
mode (Speed, Cadence, Heart Rate) is completed, the computer
cannot tell one signal from another.
easy setup (ReSet)
06 Incite ACH 07_13.indd 15 7/14/06 7:26:03 AM