Trek Bicycle Computer - Manual (Page 19)

Mode Set
Scroll

reSTArT- geTTIng reAdy TO rIde
Your computer stores data for two
intervals- since last ReSet and since last
ReStart. ReSet sets ALL data to zero.
ReStart sets only the Trip data to zero.
To reStart (set the Trip data to zero)
The trip data includes five modes for seven
total sets:
• ODOMETER TRP
• SPEED
AVG, MAX
• ALTITUDE TRP, MAX
• GRADE AVG
• CLOCK (Stopwatch)
1. Cycle •Mode to CLOCK.
2. Cycle Scroll to Stopwatch (Figure 16).
3. Hold Set• and then at the same time, Hold •Mode .
Stopwatch setting reads ‘00:00.00’ indicating trip mode is set to zero.
To start the trip modes
Any input of distance or cadence will start the stopwatch and
other trip modes.
ReStart
Fgure 6- Stopwatch mode
showng tme wth seconds
06 Incite ACH 07_13.indd 17 7/14/06 7:26:04 AM