Trango Broadband PTZ-900 - Manual (Page 3)

rev E Trango Systems, Inc. 5 4 PTZ-900 Installation and Operating Instructions
10 To help protect against potential lightning damage use a lightning
surge arrester in line with all cabling entering a structure.
Important! Power Adapter must be kept dry.
Your Trango PTZ-900 System
Congratulations on choosing Trango Systems, Inc., to fulfill your wire-
less video needs.
Unpack your system carefully. If any items are missing, notify your
sales representative. If an item appears to be damaged from shipment,
replace it in its packing material and notify the shipper. Save the pack-
aging for further storage of the equipment.
Service
If the unit ever needs repair service, contact your dealer/distributor for
return authorization and shipping instructions. Do not attempt to re-
pair the unit yourself, as this may void the warranty.
FCC Information
ID number for the PTZ-900 TX : FCC ID# NCYPTZ900TX
This equipment generates, uses, and can radiate radio-frequency en-
ergy and, if not installed and used in accordance with these instruc-
tions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to
radio or television reception (which can be determined by turning the
equipment off and on) the user is encouraged to correct the interfer-
ence by one of more of the following measures:
1 Reorient the receiving antenna;
2 Separate the affected equipment from the receiver;
3 Connect the affected equipment to an outlet on a different circuit
from that which the receiver is connected to;
4 Consult the dealer and/or experienced radio/TV technician for help.
Important! Intentional or unintentional changes or modifications not
expressly approved by the party responsible for compliance must not
be made. Any such modifications could void the user's authority to
operate the equipment.
System Description
The PTZ-900 is a professional-quality wireless transmission system
designed for sending digital, simplex (one-way) signals for pan, tilt,
zoom and camera control up to twelve miles in line-of-sight. The sys-
tem employs 900MHz frequency-hopping spread-spectrum technology
with the maximum effective radiated output power allowed by the FCC
for unlicensed operation. The system will operate interference-free with
the Trango Falcon or Eagle series wireless video transmission systems
to form a complete, wireless control link.
Most common connection diagram for setting up a PTZ link using the PTZ-900-N system.
The dome shown may instead be a standard receiver/driver unit with a separate PTZ base.
PTZ CONSOLE
shielded twisted pair
(4000¢ maximum in RS-422 mode)
AD900-9-P AD900-9
PTZ-900 TX
(transmitter)
PTZ-900 RX
(receiver)
DOME or
RECEIVER DRIVER
shielded twisted pair
(4000¢ maximum in RS-422 mode)
Since the patch antennas are directional, they must be aligned toward each other as shown.
The AO900-3-P antenna is available for omnidirectional coverage, for which the receiver
antenna must be vertically polarized by rotating it 90° from its normal position.