Truly electronic Mftg MP313X - Manual (Page 29)

29
2) Press [+/–] to select “Quality” and press [ ] to
enter the submenu. Press [+/–] to select the
recording quality you want: low, normal and
high. Press [
] to finish setting and go back to
the recording setup submenu.
Connect one connector of the supplied LINE IN
cable into the LINE IN jack on the unit, and the
other connector to a LINE OUT jack of an audio
equipment. This will ensure the recording will not
be interfered by external noises. Press [+/–] to select
“Recording” and press [
] to enter the recording
submenu. When finishing setting, press “Start
Recording” and press [
] to start recording. The
recorded files will be automatically saved to the
corresponding directory.
Direct recording setting (5)
be sure to select “LINE IN” as the recording
source. Note:
Fig. 14 Fig. 15