TOA Electronics EXES 6000 CP-63 - Manual (Page 47)

Example of Group Blocking registration
To use this function, station No. 200 programming (No.470
programming or No.740 programming) of the allocated
station number, group, paging zone, etc., must be set up in
the exchange.
1. Example of conversation and paging
To make this example of Group Blocking available for
the system, the following programming at steps 2
through 4 must be set up in each exchange.
Exchange C Exchange B
2. "No. 200 programming" in Exchange A
Function registration (A) Function registration (B) Function registration (C)
Exchange A Exchange B Exchange C
3. "No.470 programming" in Exchange B
Function registration (A) Function registration (B) Function registration (C)
Exchange A Exchange B Exchange C
4. "No. 740 programming" in Exchange C
Function registration (A) Function registration (B) Function registration (C)
Indicates that registration is not necessary.
Indicates that the station is not within the group. Exchange A Exchange B Exchange C
Exchange A
All-call paging
Paging to Zone No.4
Paging to Zone No.8 Paging to Zone No.15
— 46 —