Technics SC-EH680 - Manual (Page 30)

30
RQT6301
Recording operations
1
2
B
A
2
3
¥
REC
PAUSE
DECK 1/2 1
2
∫
∫
2 1
2 3
∫
MHz
NR Î
2
NR Î
1 2
TAPE EDIT
REC
REC
TUNED
»
A Recording the radio
Preparation: Do the preparatory steps ( á page 28).
1
Tune to the required station.
( á page 17 or 18)
2
Press [
´
REC PAUSE].
The deck goes into the recording standby mode and the play indica-
tor “
" ” or “ ! ” starts flashing.
3
Press [
"
] (reverse side) or [
!
] (forward side) to start
recording.
To stop recording
Press [ º ].
To temporarily stop recording
Press [ ´ REC PAUSE].
The deck goes into recording standby mode.
To resume recording press [
" ] or [ ! ] with the flashing indicator.
»
B Tape-to-tape recording
Preparation:
³ Do the preparatory steps 1 and 3 ( á page 28).
³ Insert the tape to be recorded in deck 1.
1
Set the tape direction on both decks.
Press [DECK 1/2] to select “DECK 2”.
First press [ " ] or [ ! ], and then [ º ].
Repeat steps and for deck 1.
2
Press [TAPE EDIT] to start recording.
The indicator “ " ” or “ ! ” shows deck 2 direction.
If either deck 1 or deck 2 stops, the other deck also stops.
To stop recording
Press [ º ].
Both decks will stop.
To enjoy another source while recording
Start playing the other sound source.
You can change the volume level and tone quality without affecting the
recording.
Note
The recording level and the noise reduction effect of the original (playback)
tape will be recorded on the new tape.