Technics SC-EH680 - Manual (Page 34)

34
RQT6301
Timer operations and convenient functions
A
DISPLAY MODE
DISPLAY MODE
B
C
VCR/AUX/
6CH INPUT
TAPE/
DECK 1/2
TUNER/
BAND
2 / ; 1 ∫
MUTING 4 5
j VOLUME i
CD
VOLUME
MUTING
MUTING
PHONES
MUTING
EH680
EH680
MUTING
a
b
c
»
A Changing the sound range display
The sound processor shows the level of each sound range with the three
types of display described below.
Press [DISPLAY MODE].
The spectrum display will change as follows.
[a]
Normal display
This display indicates the strength of the sound in each tonal range.
[b] Peak-hold display
The peak sound value of each sound range is held on the display for
about one second after it occurs.
[c]
Aurora display
The peak sound value of each sound range is displayed in inverted
form.
»
B Muting the volume
[EH780] [EH580]
Remote control only
Press [MUTING].
Volume is reduced to minimum.
[EH680]
On the remote control or the tuner/amplifier
Press [MUTING].
The indicator lights green and volume is reduced to minimum.
To cancel
Press [MUTING] again.
“MUTING” goes out and the volume is restored.
To cancel from the tuner/amplifier, turn [VOLUME] to minimum (– – dB),
then raise it to the required level.
Muting is also canceled when the unit is turned off.
»
C Using headphones (not included)
Reduce the volume before connection.
Avoid listening for prolonged periods of time to prevent hearing damage.
Plug type: 3.5 mm stereo
(On the sound processor)