Configuration, Configuration in gui, How to start – TRENDnet Cable Modem/xDSL TW100-W1CA User Manual
Page 10
Advertising
- 6 -
CONFIGURATION
The product can be configured through the setup program (included in the package), through
a terminal emulation program, such as Windows HyperTerminal, or through Telnet. The
product can be set with a range of options to allow it to function in most any network
environment.
Configuration in GUI
How to start
1.
For the first time installation, in Windows, run setup.exe at the root directory.
Figure 3
2.
When the setup program is installed, go to Start? Programs ? IP Share Setup.
Figure 4
3.
When the opening screen appears, click Find to find the device you want to configure.
Advertising