Starting the configuration – TRENDnet Cable Modem/xDSL TW100-W1CA User Manual
Page 21
Advertising
- 17 -
333
Figure 20
Starting the Configuration
1.
Once the connection is made successfully either via HyperTerminal or Telnet, the
following information will appear,
Dual Ethernet IP Share for Cable/xDSL Modem, version X.XX
Administrator password:
2.
No password is required the first time you log in. Press <ENTER> to enter Configure
mode. The screen prompts you for the following command.
command>
3.
Type ? and hit “Enter” for a list of the commands.
Refer to the next section “Terminal Commands ” for detail description of terminal commands.
Advertising