Technicolor - Thomson Thomson Lyra PDP2800 - Manual (Page 42)

40 Chapter 2
Features & Menus
Playing Your Thomson Lyra Jukebox in your car stereo
The cassette adapter lets you listen to the Thomson Lyra Jukebox in an automobile or RV
safely without having to wear headphones.
The car kit is included with your Thomson Lyra Jukebox. This accessory kit includes a car cord
adapter (#54095) and a cassette adapter (#54097). The car cord adapter lets you power your
Thomson Lyra from the cigarette lighter socket of a car, truck, or RV. It converts 12-volts to a
4.5-volt output.
1. Insert the plug on the cassette adapter into the headphone jack on the player. If the
headphones are attached, remove them.
2. Set your cassette player to your normal listening level.
3. Insert the cassette (Side A up) into your cassette player making sure the cord is placed in
the correct position for your type of player.
4. Attach the end of the car cord adapter to the DC IN jack on your Thomson Lyra Jukebox
(the POWER light comes on).
5. Remove the cigarette lighter from the socket, and insert the car cord into the socket.
6. Turn on your Thomson Lyra Jukebox, and operate the Thomson Lyra Jukebox to play
music as described in Chapter 1.
7. Control the volume with the cassette player.
8. When you’re finished,
A. Remove the cassette adapter from the cassette player.
B. Turn off the Thomson Lyra Jukebox.
C. Remove the car cord’s plug from the cigarette lighter socket.
Cautions: Make sure to place the wire securely into the slot on the cassette in the
correct direction for the type of player you have. The car cord adapter is designed
to be used only with vehicles having negative ground electrical systems. Use of any
other car cord adapter may damage your Thomson Lyra Jukebox and void your
warranty.