Tyco Electronics M7200 - Manual (Page 43)

MM-011553-001, Rev. A
43
4. Press the Select button.
5. If the SOI mode was selected, the “Vchan Menu” automatically appears; choose a radio frequency
channel using , and confirm by pressing the Select button. If selecting the SOI mode, observe
the WARNING in Section 6.34.3.
Instead of using the “Vmode Menu,” some radio installations may be configured to
automatically enter a V-TAC mode when a dash-mounted switch is flipped or some
other action is performed. For example, the V-TAC can be wired and configured to
automatically enter the XCOV mode when the vehicle’s portable radio is removed from
its vehicular charger. See Changing Between Extended Coverage Modes in Section
6.34.1 for additional information.
6.34.6 Displaying V-TAC Information
When using a V-TAC mode, repeated depressions of the Select button causes the following information
to appear in the bottom line of the dwell display:
•
XCOV and XCOV-TG modes only: Total number of portable radios (clients) currently connected to
the V-TAC.
•
XCOV-TG mode only: Talk group currently used for XCOV-TG communications.
•
XCOV-TG mode only: Profile currently used for XCOV-TG communications.
•
All V-TAC modes: Current V-TAC channel. (Does not apply to the Mobile-Only mode.)
•
All V-TAC modes: Currently utilized V-TAC mode (XCOV, XCOV-TG, SOI, or Mobile-Only
mode).