Sony SLV-SE20UX - Manual (Page 8)

Getting Started 8
Step 3
Connecting the VCR
If your TV has a EURO-AV connector, see page 9.
If your TV does not have a EURO-AV (Scart)
connector
: Signal flow
AERIAL IN
Aerial cable (supplied)
AERIAL IN
AERIAL OUT
to mains
1
Disconnect the aerial cable from your TV
and connect it to AERIAL IN on the rear
panel of the VCR.
2
Connect AERIAL OUT of the VCR and
the aerial input of your TV using the
supplied aerial cable.
3
Connect the mains lead to the mains.
If the mains plug does not fit in the mains, use the supplied plug
adaptor.
Note
• When you connect the VCR and your TV only with an aerial cable, you have to set
RF MODULATOR in the OPTIONS-2 menu to ON (initial setting) (see page 58).
Mains lead
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE