Topcom BUTLER 3055 User Manual

Page 161

Advertising
background image

ENGLISH

161

Butler 3055

161

161

161

161

161

161

161

161

161

161

161

161

Afterwards, you must resubscribe all handsets as described in point 4.24! However you no
longer need to set the base unit to subscription mode, because this now happens automatically!

4.33 Setting the handset dialling mode

There are two types of dialling modes:
- DTMF/Tone dialling (the most common)
- Pulse dialling (for older installations)

To change the mode of numeration:
- Press the programming key
- Press the Up or Down key

repeatedly until ‘SETTING’ appears on the display.

- Press the Programming key
- Press the Up or Down key

repeatedly until ‘DIAL MODE’ appears on the display.

- Press the Programming key
- Select ‘TONE’ or ‘PULSE’ by means of the UP and Down key
- Press the Programming key

to confirm

Note: The handset dialling mode is independent from the base (See 7.3)!! To change the dialling mode of

the base telephone you have to use the T/P switch at the bottom of the base.

5

CALLER ID/CLIP

(This service only works when you have a Caller ID/Clip subscription. Contact your telephone
company).
When you receive a call, the telephone number of the caller, the date and time appears on the
handset display. The telephone can receive calls in both FSK and DTMF. If the name is program-
med in the Phone Book, the name in the Phone Book is displayed!

The telephone can store 30 calls in a Call List that can be reviewed later. The telephone never
stores the same call twice. When the memory is full, the new calls automatically replace the
oldest calls in the memory. The symbol

on the display blinks if the call is not read or not

answered. If the Call List is empty and you press the Up key

, three beep tones will sound.

You can view the information of an incoming call as follows:
• Press the Up key

. The name (if sent by the network or present in the Phone Book memory)

of the caller, the sequence number of the call in the Call List, the date and time of the call
appear on the display.

• Press the Down key

. The telephone number of the caller appears on the display.

HANDL. B3055_scan.qxd 5/5/03 10:44 pm Page 161

Advertising