TP-Link TL-SL2210WEB - Manual (Page 27)

20
Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
can communicate with any other ports but other ports can’t communicate with
each other.
4.5 Port Trunking
Trunk is Link Aggregation. It optimizes port usage by linking a group of ports
together to form a single trunk (aggregated groups1.Bandwidth of the Trunk is
the sum of bandwidth of its member port.
There are some rules on using Trunk:
11 Before setting the Trunk, its member ports should be divided to the same
VLAN, and have the same PVID and drop untagged frame rule. Change
of the Trunk setting will not affect the VLAN setting. Trunks can not be set
if the switch is in MTU VLAN mode
21 The Trunk member ports can’t enable port security and can’t be set as
mirror or mirrored port.
31 All of the Trunk member ports should be connected correctly; otherwise
some ports will not be able to work.
4.6 Priority Setting
The priority mode of the switch can be set to “Disable”, “Port-Based” or
“IEEE802.1p”.
4.6.1 Priority Mode
Three priority modes (disable, port-based and IEEE802.1p1 are provided for
this switch family.
The priority rule can be set to “Weighted” or “Fixed”. When priority rule is