TP-Link TL-SL2210WEB - Manual (Page 59)

52
Gigabit Web Smart Switch User's Guide TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
VLAN ¾ : The VLAN number. Select the number of the VLAN you want to
configure here.
Port
¾ : The switch port number.
Member ¾ : Select the member of the VLAN here. If this field is checked, it
indicates the port belongs to the current VLAN.
Description
¾ : Display the user-defined port description.
All VLAN ¾ : Display all defined Port VLANs.
Figure 5-37 All Port VLAN
Select All ¾ : Select all ports to be the VLAN member.
Clean Up ¾ : Clean up all members of the VLAN.
Submit ¾ : Submit to buildup a VLAN with the selected members.
Notice:
11 Any VLAN cannot be the subset or superset of other VLANs.
21 At least two port members should be included to add a VLAN group. (If the
page is submitted with 0 VLAN member, it indicates to delete the VLAN.1
31 If any Trunk has been set, the Trunk can be configured as a VLAN
member, and the member ports of the Trunk cannot be configured (see
Port 1 and 2 in the figure for example).
41 For the first time the Port VLAN mode is set, a default VLAN, which is
indexed as NO. 1 and contains all switch ports, will be built up.
51 The ports haven’t be assigned to any VLAN manually will be assigned to a
hidden VLAN automatically to make sure they can communicate with each