TOA Electronics C-CV854D-3 CE - Manual (Page 9)

9
Fixing screw
Pipe receptacle thread cover
Cord bush
Cord bush
2. Push in the cord bush attached to the camera unit from the back to pull out from the case. Run the cable
and lead it out from the camera pipe receptacle thread hole.
Push the cord bush.
5.2.2. Open wiring from the camera’s side
Note
The pipe receptacle thread on the camera's side is compatible with 3/4-inch threaded conduit.
1. Loosen the fixing screw with a standard driver, then detach the camera side-attached pipe receptacle
thread cover.