Toshiba Blu-Ray Disc Player BDX1200KU - Manual (Page 23)


E
ng
lis
h
POWER
Cannot play back a disc. Make sure that the Blu-ray Disc™ player supports the disc.
Make sure that the Blu-ray Disc™ player supports the region
code of the DVD or Blu-ray Disc™.
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
finalized.
Clean the disc.
Cannot play back JPEG
files from a disc.
Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET format.
Cannot play MP3 files
from a disc.
Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET format.
Make sure that the bit rate of the MP3 files is between 8 and
320 kbps.
Make sure that the sample rate of the MP3 files is 32kHz,
44.1kHz or 48kHz.
Cannot find a JPEG file. Make sure that the selected group (folder) does not contain
more than 9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Cannot find a MP3 file. Make sure that the selected folder does not contain more than
9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3.
Cannot upgrade SW . When you upgrade the system with USB Flash device, you
should make a new folder named UPG_ALL, and copy the
upgrade file into this folder.
The USB Flash Device
cannot be played.
Use USB Flash Device corresponding to the Mass Storage
Class Driver.
Sometimes the options
of setup menu cannot
be selected.
When playing a DVD disc or Blu-ray Disc™, press STOP
button once, the player will go into stop resume mode,
meanwhile you cannot change some settings in setup menu
such as language subitem menu, audio, subtitle etc.
If you want to change that, press STOP button twice, the
player will go into full stop mode, then you can do it.