7 system programmability, 8 engineering units – Taurus Group 60 User Manual

Page 43

Advertising
background image

Turbomachinery Package Specification

Taurus

60 Compressor Set and Mechanical Drive

are available for transmittal. Interface modules mount in the controller rack and connect
through the rack’s backplane. Available connections are:

• ControlLogix 1.5
• Ethernet
• Data Highway Plus
• Modbus

10.5.7 System

Programmability

The Turbotronic 4 system is fully programmable in the field. Programming requires a
licensed copy of Rockwell Automation’s RSLogix 5000 software installed on a suitable
computer with the corresponding interface card installed. Solar offers two standard
options:

Software, instruction manual, interface card, and connecting cable.
Fully configured portable computer with the software, instruction manual, interface card, and

connecting cable

10.5.8 Engineering

Units

The following engineering unit options are available for the screen displays:

Metric 1

Metric 2

Metric 3

English

Pressure kPa

bar

kg/cm3

psig

Temperature °C

°C

°C °F

Table 10. Turbotronic 4 Control System Specifications

Temperature Monitoring

Resistance Temperature Device (RTD)

100 ohm Platinum

Turbine T5

6 Thermocouples

Turbine Air Inlet

Resistance Temperature Device (RTD)

Turbine Lube Oil Header

RTD

Turbine Lube Oil Tank

RTD

Turbine Gas Producer Thrust Bearing

RTD (1 connected and 1 spare)

Turbine Power Turbine Thrust Bearing

RTD (1 connected and 1 spare)

Turbine #1 Bearing Drain

RTD (1 connected and 1 spare)

Turbine #2 and #3 Bearing Drain

RTD (1 connected and 1 spare)

Turbine #4 and #5 Bearing Drain

RTD (1 connected and 1 spare)

Compressor Driver End Bearing (If Applicable)

RTD (1 connected and 1 spare)

Compressor Driven End Bearing (If Applicable)

RTD (1 connected and 1 spare)

Vibration Monitoring

Turbine Bearing #1

Displacement Probes, X and Y axis

Turbine Bearing #2

Displacement Probes, X and Y axis

Turbine Bearing #3

Displacement Probes, X and Y axis

Turbine Bearing #4

Displacement Probes, X and Y axis

Turbine Bearing #5

Displacement Probes, X and Y axis

Turbine Rotor Shaft

Displacement Probe, Axial Position

Turbine Gas Producer Rotor Shaft

Keyphasor

Turbine Power Turbine Rotor Shaft

Keyphasor

Compressor Bearing Driven End

Displacement Probes, X and Y axis

Compressor Bearing Driver End

Displacement Probes, X and Y axis

Gearbox (If Applicable)

Acceleration Probe
Displacement Probes, X and Y Axis (Optional)

© 2009 Solar Turbines Incorporated. All rights reserved.

TPS60CSMD/309

42

Advertising