Technicolor - Thomson mkiiLDK 23hs User Manual
Page 38
4-6
Operator's Manual LDK 23HS mkII - HS Camera System
Location of Controls and Functions
1
On-air indicator switch
The on-air indicator switch disables (OFF position) or
enables the on-air LED indicator on the viewfinder.
2
On-air indicators (red)
The red on-air LED indicator light to indicate that the
camera is on-air or recording.
3
On-air / ISO indicators (red / yellow)
These LED indicators light red to indicate that the
camera is on-air or recording.
They are also used as ISO-indicators (yellow). This is
a secondary indicator which is controlled by a signal
applied to the signalling connector of the CPU. It
indicates that the camera signal is being used for
recording purposes but is not on-air.
On-air indication will override ISO.
4
Call switch
Operating this momentary switch sends a signal to the
control panels calling for attention.
OFF
THS 1393
1
2
3
4