Topcom OGATECH OG-S60 User Manual
Page 22
22
OGATECH OG-S60/TWIN/TRIPLE/QUATTRO
OGATECH OG-S60/TWIN/TRIPLE/QUATTRO
5.
Press OK
6.
Enter the name
7.
Press OK to validate
While entering the name, press ‘c’ to delete a character and press and hold
to exit the
menu without taking any modifications into account.
4.6
Changing the PIN code
Certain functions are only available to users who know the PIN code. By default this is PIN
code = 0000.
To change the PIN code:
1.
Enter the menu by pressing /OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select PIN CODE using the up
and down keys
5.
Press OK
6.
Enter the old 4 figure PIN code.
7.
Press OK
8.
Enter the new 4 figure PIN code
9.
Press OK
10.
Enter the new PIN code a second time
11.
Press OK to validate
4.7
Setting the dialling mode
There are two types of dialling mode:
•
DTMF/Tone dialling (the most common)
•
Pulse dialling ( for older installations )
To change the dialling mode:
1.
Enter the menu by pressing /OK
2.
Select setup using the up
and down keys
3.
Press OK
4.
Select DIAL MODE using the up and down keys
5.
Press OK
6.
Select the dialling mode using the up
and down keys
7.
Press OK to validate
4.8
Flash time duration
1.
Enter the menu by pressing /OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select RECALL using the up and down
keys
5.
Choose RECALL 1 for short flash time (100ms) or RECALL 2 for long flash time
(250ms)