TANDBERG D13841.01 User Manual
Page 38
TANDBERG 3G Gateway User Manual
38
IP Ethernet Speed
Auto
The gateway will automatically detect the speed/duplex on the LAN.
10Half
The gateway will connect to the LAN using 10 Mbps/Half Duplex.
10Full
The gateway will connect to the LAN using 10 Mbps/Full Duplex.
100Half
The gateway will connect to the LAN using 100 Mbps/Half Duplex.
100Full
The gateway will connect to the LAN using 100 Mbps/Full Duplex.
Static IP Address
The Static IP Address defines the network address of the gateway. This address is only used in
static mode. Your LAN administrator will provide you with the correct address for this field.
Static IP Subnet Mask
The Static IP Subnet Mask defines the type of network. Your LAN administrator will provide the
correct value for this field.
Static IP Gateway
The Static IP Gateway defines the Gateway address. Your LAN administrator will provide the
correct value for this field.
Save
When ready to store the new settings, press
‘
Save
’
. These settings will take effect when the
system is restarted.
Restart
This button will restart the gateway. Any changes made in IP Configuration and IP Service will
then take effect.