Toshiba V.90 User Manual
Page 37
AT Commands
AT command formats
18
The ATI11 command may be issued from online command mode
or after the end of a call. After a call, some of the values are no
longer valid; it’s useful to know which ones.
Each of the line items in the ATI11 results are defined as follows:
1
V.90, V.34, or V.32 depending on the type of connection
negotiated.
2
Initial upstream rate.
3
Initial downstream rate.
4
Current or final upstream rate.
5
Current or final downstream rate.
7
Data Compression Result
V42bis
8
Estimated Noise Level
152
9
Receive Signal Power Level (-dBm)
25
10
Transmit Signal Power Level (-dBm)
16
11
Round Trip Delay (msec)
4
Press any key to continue:
Esc
to quit.
12
Near Echo Level (-dBm)
NA
13
Far Echo level (-dBm)
NA
14
Transmit Frame Count
3
15
Transmit Frame Error Count
0
16
Receive Frame Count
0
17
Receive Frame Error Count
0
18
Retrain by Local Modem
0
19
Retrain by Remote Modem
0
20
Call Termination Cause
0
21
Robbed-Bit Signaling
00
22
Digital Loss (dB)
6
OK