Vn dce response format, Wn result code option, Xn result code selection, call progress monitoring – Toshiba V.90 User Manual
Page 42
AT Commands
AT command formats
23
Vn DCE response format
This command controls whether result codes (including call
progress and negotiation progress messages) are displayed as
words or their numeric equivalents.
Result Codes:
Wn Result Code Option
Result Codes:
Xn Result code selection, call progress monitoring
This command sets detection options for dial tones and busy
signals, which is its primary function. However, it also enables or
disables extended result codes.
V0 Displays result codes as digits.
V1 Displays result codes as text (default).
OK
n=0,1
ERROR
Otherwise
W0
CONNECT result code reports DTE speed. Disable
protocol result codes.
W1
CONNECT result code reports DTE speed. Enable
protocol result codes.
W2
CONNECT result code reports DTE speed. Enable
protocol result codes (default).
OK
n=0,1,2
ERROR
Otherwise