Texas Instruments TMS320DM6446 DVEVM v2.0 - Manual (Page 56)

Changing the Video Input/Output Methods
A-2
A.1 Changing the Video Input/Output Methods
The EVM can input video using the following methods:
❏ Composite [default]
❏ S-Video (best quality)
In addition, there are three types of video output:
❏ Composite [default] (lowest quality)
❏ S-Video (medium quality)
❏ Component (best quality)
There is a significant quality difference between the different inputs and
outputs. However, the cables in the DVEVM kit support only composite
video. You will need to get S-Video or Component video cables from
another source.
A.1.1 Using S-Video Input
To switch to higher-quality S-Video input, follow these steps:
1) Connect your S-Video connector to the S-Video input port, which is
directly to the left of the currently-used composite video input port.
2) Select S-Video input on the command line when you execute the
encode or encodedecode demo using the '-x' flag.
S-Video
IN