Tannoy PASSIVE STUDIO MONITORS 6 - Manual (Page 7)

12 13
9.0: DECLARATION OF CONFORMITY
The following apparatus is/are manufactured in China for Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5
4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives
relevant to Domestic Electrical Equipment. The apparatus is designed and constructed such that electromagnetic disturbances
generated do not exceed levels allowing radio and telecommunications equipment and other apparatus to operate as intended,
and, the apparatus has an adequate level of intrinsic immunity to electromagnetic disturbance to enable operation as specified
and intended.
This equipment conforms to the requirements of the EMC Directive 89/336/EEC, amended by 92/31/EEC and 93/68/EEC and
the requirements of the Low Voltage Directive 73/23/EEC, amended by 93/68/EEC.
Details of the Apparatus: Tannoy Monitor Loudspeaker
Model Number: Reveal 6
Applicable Standards: EN55103-1:1996 Emission
EN55103-2:1996 Immunity
Electrical Safety EN60065:1993
Signed:
Position: Technical Director
Date: 1 March 2005
For Tannoy Ltd
7.3: CROSSOVER
The crossover is mounted on the rear of the terminal panel. To inspect it, remove the panel by releasing the hexagonal screws.
Take care to avoid undue stress on the cables and components.
To remove the crossover completely the cables must be disconnected from the drive unit. Please proceed as above to remove
the drive unit.
8.0: WARRANTY
NO MAINTENANCE OF THE REVEAL 6 MONITOR IS NECESSARY.
All components are guaranteed for a period of five years from the date of manufacture, subject to the absence of, or evidence
of, misuse, overload or accidental damage.
For further information please contact your dealer or the distributor in your country.
If you cannot locate your distributor please contact:
Customer Services, Tannoy Ltd., Coatbridge, Strathclyde, ML5 4TF, Scotland
Telephone: 01236 420199 (UK) +44 1236 420199 (International)
Fax: 01236 428230 (UK) +44 1236 428230 (International)
Internet: http://www.tannoy.com
DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION
This warranty in no way affects your statutory rights.
7.4: LIST OF SPARE PARTS
PART NUMBER DESCRIPTION
Driver Kit
High Frequency Unit
Passive Crossover
Further spare part details and factory part numbers can be found at www.tannoy.com
Type 1603 -7900 0747
Type 0294 – 7900 0891B
Type 1464 – 7300 0937