Perreaux ECD2 - Manual (Page 14)

13
Search Backward / Search Forward
These buttons, labeled  and , fast reverse or fast forward through the
currently playing disc as long as they are pressed.
Direct Access
These numeric buttons are used to directly access a track from the remote
control instead of stepping through using the TRACK buttons.
The first ten tracks on a disc can be selected by pressing the corresponding
button on the remote control. For example, to play the eighth track, press
.
When accessing track numbers greater than 10, press followed by the track
number. For example, to select track 15, press
followed by and .
The number of the selected track will appear on the display.
There is also a four by four matrix of track numbers (1 – 16) at the right side of
the display. This indicates all of the tracks on the disc. If there are more than
16, all of the digits will illuminate, accompanied by the word OVER, regardless
of which track is playing. This matrix is independent of the main numeric area
of the display, which will always indicate the currently playing track, even if
above 16.
The DIRECT ACCESS buttons may also be used to memorise tracks in
PROGRAM mode.
Track Forward / Track Backward
These buttons are used to select tracks on the disc. When a disc is playing,
pressing the TRACK forward button advances to the beginning of the next track.
Pressing the TRACK backward button returns to the beginning of the current
track. Pressing twice quickly in succession returns to the beginning of the
previous track.
Play
Press the PLAY button to start playing the disc. If the disc drawer is open,
it will close automatically. The number of the track being played and the
elapsed time will be shown in the display, along with the PLAY indicator.
Normally, the disc will start playing with the first track. However, you can
select a different track using the TRACK buttons or the DIRECT ACCESS
buttons before pressing PLAY to start playing a different selection.
Pause
This button is used to temporarily suspend play. The disc continues to spin and
play will be resumed from the current position. The PAUSE indicator will show
in the display. To resume playing the disc, press the PAUSE button again or
press the PLAY button.