Federal communications commission (fcc) statement – Targus USB Mobile Port Replicator User Manual
Page 14
13
Printer
The parallel port is designed to support parallel printers. Data storage devices
must be connected directly to the parallel port on your notebook computer.
1
If your printer is not recognized, click Start , select Settings, then
select Printers.
2
Highlight your printer, right-click the mouse button, and select
Properties.
3
If the assigned port is LPT1, change it to PB1284-1 (USB port).
For a first-time printer installation:
1
Select the port PB1284-1 (USB port). If this port does not appear
in the list, choose LPT1 and proceed with your installation.
2
Once completed, set your printer port to PB1284-1 (USB port).
Mouse
If your mouse is attached to the serial port, the enhanced features (e.g. screen
scrolling) may not be available. The mouse will function as a standard, two-
button serial mouse.
If your mouse is attached to the PS/2 port, and the enhanced features are not
working, you may need to disable the built-in mouse drivers on your
computer. Please refer to the user manual provided with your device for
instructions.
FEDERAL COMMUNICATIONS COMMISSION (FCC)
STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.