Tannoy Z600 - Manual (Page 43)

White Paper
Z600
43 September 2003
SIM AT services supported by the Z600
Service Mode Support
CALL CONTROL Yes
CELL BROADCAST DOWN-
LOAD Yes
DISPLAY TEXT Text of up to 240 characters (120 ucs2 coded). Yes
bit 1: 0 = normal priority Yes
1 = high priority Yes
bit 8: 0 = clear message after a delay Yes
1 = wait for user to clear message Yes
GET INKEY General: The GET_INKEY requires that the user
confirms his/her choice Yes
bit 1: 0 = digits (0-9, *, # and +) only
1 = alphabet set
Yes
Yes
bit 2: 0 = SMS default alphabet
1 = UCS2 alphabet
Yes
Yes
bit 3: 0 = character sets defined by bit 1 and bit 2 are
enabled
1 = character sets defined by bit 1 and bit 2 are
disabled and the Yes/No response is requested
Yes
Yes
GET INPUT General: No. of hidden input characters 20
bit 1: 0 = digits (0-9, *, # and +) only
1 = alphabet set
Yes
Yes
bit 2: 0 = SMS default alphabet
1 = UCS2 alphabet
Yes
Yes
bit 3: 0 = ME may echo user input on the display
1 = user input not to be revealed in any way (see
note)
Yes
Yes
bit 4: 0 = user input to be in unpacked format
1 = user input to be in SMS packed format
Yes
Yes
bit 8: 0 = no help information available
1 = help information available
Yes
No