Tricity Bendix AW 1560 W - Manual (Page 7)

7
7 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
pilot light stays on.
When the pilot light “prewash/wash” comes on this
means that the machine is performing the prewash or
the washing phase.
The “end” pilot light flashes in the event of operating
problems:
- 4 flashes = the door has not been closed
- 2 flashes = the machine does not empty
- 1 flash = the machine does not fill
To eliminate the problem, see paragraph “Something not
working”.
It stays on during the whole programme indicating that
the door is locked.
When the light goes out, the door can be opened (see
page 9).
8 Programme selector dial
The selector dial can be turned either clockwise or
anticlockwise.
Position O corresponds to to Reset programme /
Switching OFF of the machine.
ATTENTION!
If you turn the programme selector dial to an other
programme when the machine is working, the lights of
the programme progress display start to flash. The
machine will not perform the new selected programme.
The programme selector dial will not move during
the wash programme.
1
4
5
6
7 8
2
3
10
13
9
15
12
14
11
PROGRAMME
prewash/wash
rinses
spin
drain
end
Programme information
The wool wash cycle of this machine has been approved
by Woolmark for the washing of machine washable
Woolmark products provided that the garments are
washed according to the instructions on the garment
label and those issued by the manufacturer of this
washing machine. M9604.
This is a complete programme to be used for lightly
soiled laundry or for laundry which needs freshening up
(not available for wool).
Max load: 3. kg .
Washing temperature: 30°C
Number of rinses: 2 .
Programme duration: 30 minutes.
Short spin at 700 r.p.m max.
With this programme it is possible to rinse and spin
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final
short spin at the maximum speed that can be reduced by
means of the relevant button.
Separate short spin for hand washed garments and after
programmes with “rinse hold” option. Before selecting
this programme the selector dial must be turned to “O”.
You can reduce the speed by means of the relevant
button to adapt it to the fabrics to be spun.
For emptying out the water of the last rinse in programmes
with the “rinse hold” option.
Turn first the programme selector dial to O, then select
drain programme 8 and depress the “start pause” button.
Hand washed cotton items can be softened with this
programme. The machine will perform 1 rinse followed
by a final long spin at the selected speed.
9 = Softeners
8 = Drain
7 = Spin
6 = Rinses
12 = Mini Program
11 = Wool
132991640.qxd 06/10/2003 17:08 Pagina 7 (Nero/Process Black pellicola)