Tyco Electronics M7300 Series - Manual (Page 26)

MM-014716-001
26
Menu Name
Radio Displays
(top and bottom lines)
Usage Notes
See Previous Page
current scan mode
Scan Mode
“ScnModeMenu”
Use to turn scan on and off. Press MENU to return to
dwell display.
talk group “<” Talk group
Lock Out “LockOutMenu”
Use to choose a talk group for locking/unlocking. Press
MENU to toggle “<” on (locked out) and off.
current priority talk group Priority 1
Talk group “Priority1”
Use to choose new priority talk group. Press MENU to
return to dwell display.
current priority talk group Priority 2
Talk group “Priority2”
Use to choose new priority talk group. Press MENU to
return to dwell display.
alert received
Emergency Dismiss
“EmgDismiss”
Use to choose emergency talk group. Press MENU to
dismiss.
time/sender’s name/
alias/message text
Alerts Received
“AlertsRcvd”
or oldest message
“No alerts” or alert message text scrolls in display. Use
to view messages.
current speed dial #
Alert Destination
“AlertDest”
Use to choose a speed-dial number. Press MENU to go
to “AlertMsg” menu. Scroll through canned messages with
. Press MENU to send message and return to dwell
display.
current speed dial #
Speed Dial
“SpeedDial”
Use to choose a speed-dial number. Press MENU, then
use to select canned message.
currently active profile
Profile Selection
“ProfileMenu”
Use to choose an available profile. Press MENU to
return to dwell display.
selected talk group Talk group
Selection “TalkGrpMenu”
Use to choose a talk group in current profile. Press
MENU to return to dwell display.
Selected talk group
Dwell Display
(bottom line option)
Use to scroll top line through talk groups. Press MENU
to change bottom line option.
Use , CLR, or OPT to scroll through menus.
Menus will vary depending upon system programming, radio hardware, and optional
configurations.