Tyco Electronics M7300 Series - Manual (Page 91)

MM-014716-001
91
FEATURE DISPLAY
PARAMETER
SETTINGS
COMMENT
Scan
Add/Delete
Menu item: SCAN A/D
When selected: Toggles
through scan selections
Toggle sequence
S, 2, 1, S, ... Changes present group or channel to next scan
choice in scan list.
Last Scanned
Channel Recall
Menu Item: SCAN ADD
Press twice when actively
receiving; three times
when not receiving. Scan
icon displayed.
Changes the selected channel to the last
scanned channel.
Home channel
selection
Menu item: HOME
Once selected: Home
group or channel
displayed.
Changes to the group or channel defined for
Home function.
System select
Menu item: SYS SEL
Once selected: SYS = n 1-64 = (n)umber of
desired system
Displays the system selected.
External alarm
#2
Menu item: EXTALRM2 ON, OFF Toggles external alarm #2 feature ON or OFF.
System and
Channel
selection
Menu item: SYSGRP 1
Menu item: SYSGRP 2
Menu item: SYSGRP 3
Menu item: SYSGRP 4
Menu item: SYSGRP 5
Changes to the System & Channel
programmed for SYSGRP 1-5.
Mute Menu item: MUTE ON, OFF
Toggles the mute function ON or OFF to control
the audio output from the selected radio.
Mute #1 Menu item: MUTE 1 ON, OFF
Toggles the mute 1 function ON or OFF on
radio #1.
Mute #2 Menu item: MUTE 2 ON, OFF
Toggles the mute 2 function ON or OFF on
radio #2.
Multiple radio
operation
Menu item: RADIO ON, OFF Toggles the currently selected radio.
Menu item: RADIO 1 ON, OFF Changes to radio #1.
Radio selection
Menu item: RADIO 2 ON, OFF Changes to radio #2.
Talkaround
feature
Menu item: TALKARND
Once selected:
TALKARND on line 1
ON, OFF
Toggles talkaround ON or OFF (transmit
frequency changed to receive frequency).
Feature
Encryption
Display
Menu Item: FEATURES
Once selected:
See Feature Encryption
Display section
Informational displays
only; no user selectable
settings Indicates current features programmed into the
radio as well as certain information required to
add features to the radio.
System Scan
Enable
Menu Item: SYS SCAN
Once selected: SYSC ON
or SYSC OFF
ON, OFF
System Scan features like ProScan are toggled
ON and OFF.
Type 99 Decode
Enable
Menu Item: T99 ENAB
Once selected:
T99 ON or T99 OFF
ON, OFF Type 99 Decode is toggled ON and OFF.
11.5 GROUP CALLS IN P25 MODE
11.5.1 Transmitting a Group Call
1. Select the desired P25 system.
2. Select the Talk Group/Conventional Channel. (Selected simultaneously using either the
system/group/channel knob or the group key).
3. Press and hold the PTT.
4. When a grant tone is received (if enabled through programming), speak into the microphone.
5. Release PTT and wait for response.