Tannoy DC8i - Manual (Page 2)

Definition Install DC8i
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473 E: [email protected]
E: [email protected]
[email protected]
E: [email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change Definition Install DC8i data file // issue 1.06 // 15.01.08
TECHNICAL SPECIFICATIONS
Frequency Range (1) 62Hz - 45kHz
System Sensitivity (1W @1m) (2) 92dB (1W = 2.83V for 8 Ohms)
Dispersion (-6dB) 90 degrees conical
Driver Complement 1 x 200mm (8.00”) point
source, constant directivity
Dual Concentric™
Crossover Passive 1.7kHz with dynamic
HF protection
Directivity Factor (Q) 5.7 averaged 1kHz to 10kHz
Directivity Index (DI) 7.0 averaged 1kHz to 10kHz
Rated Maximum SPL (2)
Average 113dB
Peak 119dB
Power Handling
Average 130W
Programme 260W
Peak 520W
Recommended Amplifier Power 100 - 260W @ 8 Ohms
Nominal Impedance 8 Ohms
Distortion
10% Full Power (8.94V)
2nd Harmonic 3rd Harmonic
250Hz 0.4% 0.35%
1kHz 0.28% 0.66%
10kHz 1.50% 0.35%
1% Full Power (2.83V) 2nd Harmonic 3rd Harmonic
250Hz 0.11% 0.15%
1kHz 0.12% 0.34%
10kHz 0.51% 0.17%
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Enclosure MDF, vented and internally braced
Finish Textured black paint
Connectors 2 x 4mm gold plated binding posts
Fittings 8 x M10 bracket inserts, 4 wall plate
keyhole fixings, allowing landscape or
portrait mounting orientations
1 x wall plate
Dimensions 394 x 294 x 215mm (H x W x D)
15.51 x 11.57 x 8.46” (H x W x D)
NET Weight 9.5kg (20.90lbs)
System Definition Install DC8i Construction
8000 5180 Definition Install DC8i Black 2
PART NUMBER PACKED QUANTITY COLOUR MODEL NAME
Ordering Information
Defintion_DC8i_Data_Sheet_DJ_amends:Layout 1 16/01/2008 11:11 Page 2