Tannoy DC8i - Manual (Page 8)

Definition Install DC8i
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473 E: [email protected]
E: [email protected]
[email protected]
E: [email protected]
Tannoy adopts a policy of continuous improvement and product specification is subject to change Definition Install DC8i data file // issue 1.06 // 15.01.08
The loudspeaker shall consist of a 200mm (8.00”) full range, point source Dual Concentric™ transducer. The low and high frequency elements shall be
combined by an internal passive crossover network operating at 1.7kHz with dynamic HF protection.
Performance of the loudspeaker, without any electronic control, shall meet or exceed the following criteria: Frequency range measured at 1 metre on axis
with swept sine wave shall be 62Hz to 45kHz. Sensitivity shall be at least 92dB (anechoic) for 2.83 Volts @ 1 metre and shall be capable of producing a
peak output level of 119dB (anechoic) on axis at 1 metre. The dispersion of the loudspeaker shall be 90 degrees conical (-6dB). The system shall have a
nominal impedance of 8 Ohms and maximum power handling shall be 260 Watts (programme).
The enclosure shall be an optimally tuned 17.0 litre vented cabinet of MDF construction. Connectors shall be 2 x 4mm binding posts. The enclosure shall be
fitted with 8 x integral M10 bracket inserts and 4 x keyhole fixings for portrait or landscape mounting using supplied wall plate.
The enclosure shall not exceed the following dimensions: 394 x 294 x 215mm (15.51 x 11.57 x 8.46”) (H x W x D).
The loudspeaker shall be the Tannoy… Definition Install DC8i.
Architectural specifications
Defintion_DC8i_Data_Sheet_DJ_amends:Layout 1 16/01/2008 11:12 Page 8