Turbosound MILAN MI5 - Manual (Page 16)

user manual
MILAN
MILAN user manual
Page 16
Stereo PA with an external mixer
Two Milan loudspeakers form the left and right elements of a stereo PA setup with all signal
sources connected to an external mixing console. Ensure that the mic/line switch is set to LINE on
both loudspeakers. Set the BASS MODE switch to the ‘A’ position when not using subwoofers.
Bring up the master faders on the mixer, ensuring that the outputs are not clipping, and then
adjust both loudspeakers’ level controls to the desired loudness. For consistent balance and
response set the tone controls to approximately the same positions on both cabinets.
LINE LINE MIC MIC
BASS TREBLE MIX OUT
BASS
MODE
LIMIT
-6dB
POWER
0
+
0
+
LEVEL INPUT 1 INPUT 2 LEVEL
MIN MAX MIN MAX
A B
LINE LINE MIC MIC
BASS TREBLE MIX OUT
BASS
MODE
LIMIT
-6dB
POWER
0
+
0
+
LEVEL INPUT 1 INPUT 2 LEVEL
MIN MAX MIN MAX
A B
LEFT RIGHT